Traffic Management signs
|
The signs shown below are made from Temporary reflective material (High Intensity Workzone or Engineering Grade) on Zintec, MPGRP or Aluminium plates. Our range of standard TM signs can be supplied as plate only, or drilled to fit the Quick-Fit system. |
![]() |
Please note the following:
Generally 850mm minimum width of a QF sign (due to the 750mm hole spacings on the QF frame)
- Smaller signs with smaller QF frames are available with 300mm or 450mm hole spacing
- For MPGRP signs over 2000mm wide, plate stiffening will be used
- For Aluminium signs over 2440mm wide, plate stiffening will be used
- Signs higher than 1525mm must be hinged for safe installation
- Smaller signs can be hinged for ease of handling & to offer signface protection
- Sand bags, smartlock straps or equivalent ballast must be used to safely anchor the sign & frame
- Signs can be supplied with removable cover plates attached via plastic bolts or toggle clips
All of the contraflow signs shown below can be designed to customer requirements.
![]() |
![]() |
![]() |
![]() |
|||
| P670 | P879 | P610 | P7001 | P7031 | P7202 | P7203 |
| P7204 | P7205 | P7214 | P7215 | P7216 | P7237 | P7238 |
![]() |
||||||
| P7239 | P7251 | P7252 | ERW | P7291 | P7292 | P7293 |
| P7294 | P7002a | P7003.1 | P7004 | P7005 | P7006.1 | P7015 |
![]() |
![]() |
![]() |
||||
| P7302 | P7301 | P7306 | P7001-3 | P572 | P645 | |
![]() |
![]() |
![]() |
||||
| P572 | ||||||


















